Publicidad
Idiomas disponibles
Idiomas disponibles
40. Route the long branch of wiring harness to the right side fog
lamp opening.
41. Install fog lamp conduit clips into lower radiator support
holes. The fog lamp conduit clips may need to be removed
and reattached to line up with radiator support holes. Figure
17
FIGURE 17
42. Remove left and right side fog lamp fascia caps by releasing
retaining arms. Figure 18
FIGURE 18
Fog Lamp Kit
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
REVISION
AUTH
43. Firmly push the fog lamp assemblies into the front fascia
until all fasteners are engaged. Figure 19
FIGURE 19
44. Connect fog lamp wiring harness connectors to right and left
side fog lamps.
45. Position the negative battery cable to the negative battery
terminal.
Tighten
Tighten the nut to 5 N·m (44 lb in).
46. Close hood.
47. Adjust/aim the front fog lamps after the fog lamp kit have
been installed. Refer to Fog Lamp Aiming, Document ID#
1688536
PART NO.
IR 31JL07
INSTALLATION INSTRUCTIONS
DR
TITLE
PART NO.
19170448
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19170448
SHEET
Fog Lamp Kit
5
SHEET
5
15
OF
15
OF
Publicidad
