Horizon Global 76266 Instrucciones De Instalación página 6

2. Lower exhaust - While supporting the exhaust to prevent damage remove (2) M10
factory bolts from the exhaust hangers using a 15mm socket, each side.
4. Install Hitch- Raise the hitch into position aligning the attachment holes with the M10
studs in the end panel. Reinstall the bumper beam over the hitch and onto the M10
studs in the vehicle end panel. Loosely reinstall the factory M10 nuts removed earlier.
©2018 Horizon Global Americas Inc. - Printed in Mexico
3. Remove Bumper Beam- Remove (4) 10mm factory nuts with a 15mm socket, (2) each
side, and save for hitch installation. Set bumper beam aside for reinstallation.
5. Reinstall exhaust hangers – Raise the exhaust into position and reinstall the factory
M10 bolts removed earlier through the exhaust hanger, bumper, and hitch.
Sheet 6 of 21 76266NP 10-10-18 Rev. A