Kit Assembly - Metra 99-7341B Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Secure the pocket to the radio brackets
using the (4) #8 3/8" Phillips screws
provided. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the bracket/pocket
assembly, then secure it using the screws
supplied with the radio.(Figure B)
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
5. Secure the radio assembly to the dash
using the factory screws.
6. Clip the radio trim panel over the radio
assembly, then reassemble the dash
in reverse order of disassembly to
complete the installation.

KIT ASSEMBLY

(Figure A)
(Figure B)
ISO DDIN radio provision
1. Secure the radio brackets to the radio
using the screws supplied with the radio.
(Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
3. Secure the radio assembly to the dash
using the factory screws.
4. Clip the radio trim panel over the radio
assembly, then reassemble the dash
in reverse order of disassembly to
complete the installation.
(Figure A)
REV. 5/14/2018 INS99-7341B
3