Kit Preparation; Kit Assembly - Metra 99-7336S Instrucciones De Instalación

Kit Preparation

From the factory radio/climate
control panel:
1. Remove the (4) Phillips screws
securing the climate controls, and
then remove.
2. Unclip and remove the hazard/
passenger airbag light assembly.
Continue to kit assembly
To the 99-7336 trim panel:
1. Secure the climate controls using the
factory hardware.
2. Attach the hazard/passenger airbag
light assembly.
3. Attach the (6) panel clips provided.
Continue to kit assembly
®
99-7336S
ISO DIN radio provision with pocket
1. Remove the metal DIN sleeve and
trim ring from the aftermarket
radio.
2. Secure the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
3. Secure the pocket to the bracket/
radio assembly using the (4) #8
x 3/8" Phillips screws provided.
(Figure A)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Test the
radio for proper operation.
5. Secure the completed assembly to
the sub-dash.
6. Reassemble the dash in reverse
order of disassembly using the
99-7336 trim panel.
3

Kit Assembly

(Figure A)
(Figure B)