Maintenance; Changing The Filter - Roscoe Medical ASP-ROS Manual De Instrucciones

c. Wash with a commercial (bacterial-germicidal) disinfectant. Follow
disinfectant manufacturer's recommended instructions and dilution rates
carefully.
CLEAN SUCTION UNIT AND COLLECTION BOTTLE LID
1. Disconnect the suction unit from all external power sources.
2. Wipe the suction unit housing and collection bottle lid with clean cloth
and any commercial (bacterial-germicidal) disinfectant. Follow disinfectant
manufacturer's recommended instructions and dilution rates carefully.
CAUTION
CLEAN TUBING
1. Disconnect the tubing from the unit.
2. Tubing should be rinsed thoroughly after every use by running hot tap water
through it followed by a solution of one part vinegar to three parts hot water.
3. Rinse with hot tap water and air dry.
4. Keep the outer surface of the tubing clean by wiping with a clean, damp cloth.
WARNING

MAINTENANCE

Before each use, inspect power cord for fraying/damage and all accessories
(collection canister, tubing and microbial filter) for cracks/leaks.
DANGER

CHANGING THE FILTER

1. Filter should be replaced every two months. If overflow occurs, change the
filter immediately.
2. Remove filter by disconnecting it from tubing connected to pressure adjusting
valve and tubing connected to collection lid assembly.
DO NOT submerge in water as this will result in severe
damage to the vacuum pump. DO NOT clean with
powder-type cleaning agents or soap.
The waste in collection bottle may cause respiratory
infection, which must be handled according to medical
waste disposing regulation. Operator must wear gloves and
medical-class mask before cleaning the collection tubing
and handling the collection bottle and/or accessories.
MAINTENANCE
• Electric shock hazard
• Do not attempt to open or remove the suction cabinet. If
a service is required, return your suction to an authorized
service center. Opening or tampering with the unit will
void warranty.
9