Upload Saved Traces - Textron GREENLEE 920XC-13A Manual Del Usuario

Upload Saved Traces

920XC-13A • 920XC-15A • 920XC-20C Instruction Manual
All manuals and user guides at all-guides.com
Trace Measurement and Processing of Existing Traces
Saved traces can be uploaded to a PC with the included Trace Viewer software. Then traces can be
further processed on a PC.
1.. Install.the.software.and.run..Refer.to.Section.7.
2. Power off the 920XC.
3. Connect the 920XC to a PC through RS-232 or USB interface cable.
4. Power on the 920XC, and upload data with the software (Figure 4-8).
Notes:
• Make sure the instrument is powered off when connecting to a PC through RS-232 or USB
data.cable.
• USB operation rules must be followed while connecting to a PC. Proper installation of a USB
driver is necessary before uploading the data.
• This operation cannot be applied under the GUI for parameter configuration, save trace,
browse saved traces, and measuring in progress.
Figure 4-8. Upload Saved Traces
39