Revise Events List; Add Event; Revise Event; Delete Event - Textron GREENLEE 920XC-13A Manual Del Usuario

Section 7
56
All manuals and user guides at all-guides.com

Revise Events List

Because field measurement situations are constantly changing, the 920XC analysis software
cannot guarantee that every analysis is correct. The software provides an interface for users to
revise the events list: add event, revise event, delete event, and delete events list.

Add Event

If an event on the measurement trace is not listed in the events list (due to inaccuracies caused
by poor SNR or inadequate parameter configuration), use the "add event" function to manually
add this event into the events list. Click the events list window, and select "Add event" under the
"Editing" menu (Figure 7-20). Choose the type of event from the pull-down menu, enter the event
features,.and.then.press.Enter to add the event to the events list.

Revise Event

Use the "revise event" function to manually revise features of an event (due to inaccuracies caused
by poor SNR or inadequate parameter configuration). Select the event to be revised in the events
list window, and select "Revise event" (Figure 7-21). After modifying the event feature(s), press
Enter to confirm the changes. The software will automatically refresh the event sequence.
Events can also be revised by clicking on the event to access a pop-up menu.

Delete Event

Use the "delete event" function to manually delete a trace from the events list when it appears in
error (due to inaccuracies caused by poor SNR or inadequate parameter configuration). Highlight
the event to be deleted, and then select "Delete event" under the "Editing" menu.
Events can also be deleted by clicking on the event to access a pop-up menu.
Figure 7-20. Add Event
Figure 7-21. Revise Event
Greenlee / A Textron Company