Welch Allyn CP 150 Manual Del Usuario página 2

CP 150™ 12-lead electrocardiograph — software update, version 2.00.02
Update the software
1. From the ECG home tab, touch the Settings tab. The ECG tab and the vertical ECG configuration tab
appear.
2. Touch the Device tab.
3. Touch the Updates tab.
4. Insert a USB flash drive containing the latest software into a USB port on the back of the device and
touch the Update button.
"Update complete. Press OK to reboot." appears after the update is complete.
5. Touch OK.
The device automatically reboots.
Note Do NOT remove the USB drive or AC power from the device during reboot.
6. Remove the USB drive from the CP 150.
To verify the software version:
a. Touch the Settings tab.
b. Touch the Device tab.
c. Touch the About Tab.
d. Verify that the correct software version is listed for the CP 150. You are ready to use the updated
software.
2