Intended Use - Makita GA003G Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.

Intended use

The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Noise
The typical A-weighted noise level determined according to EN60745-2-3:
Model
GA003G
GA004G
GA005G
GA006G
GA007G
GA008G
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
with BL4025
with BL4040
GA003G GA004G GA005G
100 mm 115 mm 125 mm
(4") (4-1/2")
6.4 mm 7.2 mm
M10 M14 or 5/8"
(country specific)
2.8 - 3.3 kg 2.9 - 3.5 kg 2.9 - 3.6 kg 2.7 - 3.3 kg
D.C. 36 V - 40 V max
Sound pressure Sound power level
level (L ) : (dB(A)) (L
pA
81
81
81
81
81
81
7 ENGLISH
GA006G GA007G
100mm 115 mm
(5") (4") (4-1/2")
6.4 mm
M10 M14 or 5/8"
(country specific)
-1
8,500 min
398 mm
410 mm
2.9 - 3.5 kg
BL4025 / BL4040
DC40RA
Uncertainty (K) :
) : (dB(A)) (dB(A))
WA
92
92
92
92
92
92
GA008G
125 mm
(5")
7.2 mm
3
3
3
3
3
3