SEVERIN Mr.Twister KM 3920 Instrucciones De Uso página 11

∙ Check the appliance and blade inserts
for damage before every use. Do not
operate if the appliance or a blade
insert shows any sign of damage.
∙ In the event that you detect damage,
please contact our customer service
department by phone or email (see
appendix).
∙ Repairs to this appliance or its power
cord must only be carried out by our
customer service.
Overview and parts included
1. Pestle (also holds food in position)
2. Feeder tube
3. Blade insert - 'Spaghetti'
4. Blade insert - 'Tagliatelle'
5. Gear-wheel insert
6. On/Off switch
7. Cleaning brush
8. Power cord with plug
9. Container
10. Housing
11. Feeder tube with pestle
Short-time operation
The appliance is designed for short-term operation only,
i.e. it should not be operated continuously for more than 10
minutes. Allow it to cool down for another 30 minutes, after
which it may be used again.
Blade inserts
This appliance comes with two different blade inserts:
Spaghetti' for narrow spirals
'
'Tagliatelle' for wider spirals
To achieve optimum results, we recommend replacing the
blade inserts as soon as they start producing uneven or
unsightly spirals.
Operation
∙ Clean the vegetables and cut into pieces of max. 15 cm
length.
∙ Place the container under the feeder chute.
∙ Fit the gear-wheel insert into the housing.
∙ Select the desired blade insert and fi t it into the gear-
wheel insert.
All manuals and user guides at all-guides.com
∙ Fit the feeder chute and turn clockwise until it is heard
∙ Take a prepared food item and attach it to the end of the
∙ Insert the pestle with the food into the feeder chute and
∙ Caution: Ensure that the food item does not protrude
∙ Turn the appliance on.
∙ Guide the pestle slowly downwards, without applying
∙ Take out the pestle and attach a new piece of food, if
∙ For technical reasons, a small piece if food will remain
∙ Switch the appliance off and disconnect it from the
∙ The appliance should be thoroughly cleaned after each
∙ Empty the container.
∙ Take out the pestle.
∙ Remove the feeder chute by turning anti-clockwise ( ).
∙ Remove the blade and gear-wheel inserts.
∙ Always disconnect the appliance from the mains before
∙ Do not use abrasives, harsh cleaning solutions or hard
∙ To avoid the risk of electric shock, do not clean the
∙ The housing may be wiped with a slightly damp, lint-free
∙ All detachable parts (see After use) may be cleaned
∙ Caution: The blades are very sharp. Always use the
∙ The pestle, feeder chute, gear-wheel insert and container
locking into place ( ).
pestle.
hold it in position.
from the chute.
fi rm pressure. The processed food is collected inside the
container.
∙ Hint: Should a piece of food become separated
from the pestle, switch the appliance off and
disconnect it from the mains. Then take off the
feeder chute, remove the detached food and re-
attach it to the pestle.
desired.
on the pestle. Remove this and use it another time.
mains.
After use
use (see Cleaning and care).
Cleaning and care
cleaning.
brushes for cleaning.
housing with water and do not immerse it in water.
cloth.
using hot water and a mild detergent.
cleaning brush provided.
can also be cleaned in a dishwasher. However, the blade
inserts are not dishwasher-safe.
Disposal
Devices marked with this symbol must be
disposed of separately from your household
waste, as they contain valuable materials which
11