LaserLiner CompactCross-Laser Pro Manual De Instrucciones página 15

Slope mode
3
Do not release transport safety, push ON/OFF switch (4) to the right. Select
and switch on the laser with the selection button. Sloping planes can now
be measured. This mode cannot be used to perform horizontal or vertical
levelling as the laser lines are no longer aligned automatically. The LED lights
constantly red.
LASER LASER
Hand receiver mode
4
Optional: Working with the laser receiver GRX
Use an GRX laser receiver (optional) to carry out
levelling at great distances or when the laser lines
are no longer visible. To work with a laser receiver,
switch the line laser to hand-held receiver mode by
keeping button 1 (handheld receiver mode on / off)
pressed. The laser lines will now pulsate with high
frequency, making the laser lines darker. The laser
receiver can detect these pulsating laser lines.
!
Observe the laser receiver's operating instructions for line lasers.
CompactCross-Laser Pro
LASER LASER LASER
EN
15