Changing Channels - Topcom MultiTalker 1000 Manual De Usuario

14.4 TRANSMITTING A SIGNAL
• Press and hold
• Hold the unit in a vertical position with the MICROPHONE 10 cm from the mouth and speak into the
microphone.
• Release

14.5 CHANGING CHANNELS

The PMR has 8 available channels.
To change channels:
• Press
• Press
• Press
• To confirm and shift to the next option, press
NOTE: Any PMR set on the same channel can receive and listen to the conversation, also when the other use a CTCSS
code.
14.6 CTCSS (CONTINUOUS TONE CODED SQUELCH SYSTEM)
The 2 digit CTCSS code corresponds to a specific tone frequency the radio emits. Two users, with the same channel
and CTCSS set can hear one another.They will not be able to hear anyone else on the channel unless the other radios
have the same exact CTCSS code enabled.
The PMR has 38 CTCSS codes available.
• Press
• Press
• Press
• To confirm and shift to the next option, press
NOTE: Any PMR set on the same channel can receive and listen to the conversation, also when the other use a CTCSS
code.
14.7 MONITOR
You can use the MONITOR feature to check for weaker signals in the current channel.
• Press and hold and
MENU
• Press to stop monitoring.
14.8 VOX SELECTION
The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will transmit a signal when it is
activated by your voice or other sound around you. VOX operation is not recommended If you plan to use your radio in
a noisy or windy environment.
• Press
• Press
is indicated in the right corner of the display. Press
OFF.
• In the VOX mode, the VOX icon will be displayed.
• To confirm your selection and return to the NORMAL mode, press
TOPCOM MULTITALKER 1000
to TRANSMIT.
when you have finished transmitting.
once, the current channel number flashes on the LCD Screen.
MENU
or to change the channel.
to confirm your selection and return to the NORMAL mode.
twice, the CTCSS code will flash
MENU
or to select another code.
to confirm your selection and return to the NORMAL mode.
simultaneous to activate channel monitoring.
3 times.
MENU
to turn the VOX feature ON and press
TOPCOM MULTITALKER 1000
.
MENU
.
MENU
again to select the VOX sensitivity level which
until OF appears on the display, to turn VOX
.
9