19 Attaching/Detaching the Tow Bar to the Bicycle With Coupler Attachment
• Insert the coupler attachment inside the tow bar tube and line up the holes. See Figure 19.1.
• Insert the locking pin through the holes and carefully rotate the locking clamp over the tube to secure. See Figure 19.2.
• Ensure the coupler attachment is securely attached before proceeding.
• Locate the tether attachment on the tow bar, loop it around the bicycle frame and clip the fastener onto the metal tri-clip. See Figure 19.3.
• To remove this accessory please reverse the instructions in this section.
Always make sure the trailer is securely attached to the bicycle before towing the trailer.
20 Installing the Flag
• Insert the sections of the flag pole together until they are securely connected.
• Slide the end of the flag pole into the small pocket on the side of the hood until it cannot go any further. See Figure 20.1.
21 Disassembly and Storage of the Bicycle Tow Bar and Stroller
• Ensure that the stroller and all of the attachments and accessories are clean and dry before storage.
• Store your CocoonX2 in a dry, well ventilated place.
• Disengage the bicycle tow bar and store it separately for extended periods of time.
• Prior to the next use, please check all components (including tires, tire pressure, fabric, frame, accessories) for signs of damage or
excessive wear.
• Do not use the trailer or stroller if you see signs of damage or excessive wear. Please contact Joovy Customer Service for replacement parts
or repair options.
Maintenance
All of the fittings, snaps, locks, rivets, and other hardware and plastic parts on the stroller should be inspected periodically to ensure that they are
secured properly and not damaged or malfunctioning. The restraint system, as well as all other straps and fabric items and their stitching should
also be inspected periodically to ensure that they are secured properly and not loose, torn or otherwise damaged. All moving parts, such as
wheels, brakes, and hinges should also be checked periodically to ensure they are operating properly.
Tires should be inflated to recommended pressure. See tire side wall for correct pressure. DO NOT overinflate the tires.
Any missing, broken, or worn components should be replaced immediately, and the stroller should not be used until they are replaced. Only
original manufacturer's components should be used. If needed, please contact Joovy at our toll-free phone number.
Cleaning
The fabric material on this stroller can be cleaned using mild household soap or detergent and warm water on a sponge or clean cloth. Always
allow the fabric to completely air dry before using the stroller.
The frame and wheels should always be kept clean and free of dirt and foreign matter, especially after operating the stroller in rain, snow,
or other harsh environments. Use a sponge or cloth dampened with warm water and a mild detergent cleaner to clean the wheels after
such use.
We want you to be completely satisfied with your purchase of this product. Should you experience any difficulty in
assembling or using this product, or if you have any questions, please contact our Customer Service Department:
UNITED STATES - Joovy: 1-877-456-5049, Hours 8:30 am 5:00 pm Central Time.
All manuals and user guides at all-guides.com
Always use the flag when pulling the trailer.
SATISFACTION GUARANTEED
CANADA - ISIS Inc.: 1-800-667-4111, Hours 8:30 am 5:00 pm Eastern Time.
Please log onto www.joovy.com to register your new Joovy product.
WARNING
!
WARNING
!
EN
FR ES