Junghans J800.1 Manual Del Usuario página 4

Instructions for use
Winding up the watch
With the winder in position A, you can wind up the automatic move-
ment manually. If your model has a screw-locked winder, this must be
unscrewed by turning it to the left to start your watch going. At least
2 to 3 rotations of the winder are needed to start the movement. It is
better to wind it up completely. It is fully wound up after c. 30 rota-
tions of the winder, as then the maximum accuracy and its power
reserve (even after the watch is put down) will last for the maximum
period. After you have set your watch, you should wear it, so that the
automatic winding system (via rotor movement) keeps it constantly
operational.
14
All manuals and user guides at all-guides.com
Features and functions
Calibre J 800.1
1
3
25
Setting the time
Pull the winder into position C. That stops the watch movement.
To set your watch accurately to the second, it is best to stop the
movement as the second hand is passing the figure 60. You can
now position the minute hand precisely in line with the relevant
minute marker and set the desired time. Press the winder back
into position A to start the second hand.
1 Hour hand
2 Minute hand
2
3 Second hand
4 Date display
5 Winder
5
A B C
4
15