Preparation Of The Compressor For Work; Unpacking Of The Compressor; Checking State - Prebena PKT Fillmaster 400 Manual De Instrucciones Original

Preparation of the Compressor for Work

Preparation of the Compressor for Work

Unpacking of the Compressor


Two persons should unpack the compressor.
Keep the packing material safe.

Checking State

 First of all check elements as follows:

Are the safety valves in good order?

Is the level of oil sufficient?

Is the connection to a power supply in good order

Are pressure and cooling lines in good order?

Scratches on the cover of the case are not a fault condition.
 Do not connect the defective compressor to a power supply.
 Before starting to use the compressor take employers of the company of PREBENA them to repair the
device.
12

Stand the box in front of you.
 Open the top cover of the box.
 Take the compressor carefully by handrails and stand it in front of you.
 Put off all the packing material from the compressor.
WARNING
Do not allow children to play with the packaging film. There is a danger of
suffocation.
 Do not allow children to play with the package.
 Keep the packing material in a place inaccessible for children.
WARNING
There is a danger of injuries by using a defective compressor.
 Check the state of the compressor before every using.
 Make certain of the irreproachable state of the compressor.
LOOK OUT!
Defective .pressure and cooling lines can break and that can lead to injuries.
 Before connecting check if the compressor, pressure and cooling lines have
defects.
?