After Work; Manual Blowing The Compressor - Prebena PKT Fillmaster 400 Manual De Instrucciones Original

After Work

After Work
After work or long working break do as follows:
 Stand the compressor so that one can see reading of the manometer of filling pressure.
 Disconnect the compressor from a power supply.
 Drain the condensate as it is written in p. 20.
LOOK OUT!
Condensate is a dangerous substance for the environment.
 Bind the spilled condensate by a binder.
 Gather the bound condensate by a duster.
 Recycle the duster accordingly to working legislative directions in the place of use.

Manual Blowing the Compressor

The compressor without fail is blown manually. Do as follows:
16
 Switch off the compressor before its careful standing.
 For manual blowing, turn the screw handle (1) counterclockwise. It is
closed automatically under the influence of the elastic force.
It will be heard rests of the air leave the compressor.

 Control readings of the manometer of filling pressure. If the compressor has
been blown, the manometer shows the value of the filling pressure to be zero.