Qlabs ® Electrometer Settings; Enter Setup Mode; Setting The Date - Micropoint qLabs ElectroMeter Manual Del Usuario

8. qLabs
®
Follow the steps below to set up the qLabs

8.1 Enter Setup Mode

OFF
SET MEM
VER
SETTING
DATE/TIME
PATIENT ID
BLUETOOTH
LOT NUMBER
SETTING
TARGET
UNITS
BACKLIGHT
LANGUAGE

8.2 Setting the date

01/02/12
12:00
DD/MM/YY HH:MM
-
NEXT
OK
01/02/12
12:00
DD/MM/YY HH:MM
-
NEXT
OK
ElectroMeter Settings
When the qLabs
on for the first time, the display screen
will prompt the user to insert a test strip
automatically.
s
When the screen prompts the user to insert
a test strip, press the functional "SET" button
to enter the Setup mode.
s
In "SETTINGS" screen, use "+" and "-" to
switch between different items. The meter
prompts to insert a test strip if "BACK" is
pressed. The meter enters the selected item
accordingly if "OK" is pressed.
The date format is DD/MM/YY. The first
set of digit (YY) will be highlighted. Use the
functional "+" and "-"buttons to change the
date.
+
Press the functional "NEXT" button to go to
the second digit (MM) after a correct date
is selected. Change the month and the day
using the same method.
+
ElectroMeter.
®
ElectroMeter is turned
®
11
EN