Results And Explanation - Micropoint qLabs ElectroMeter Manual Del Usuario

CODE: 1505320
LOT: 3052E0503
01/05/2014 14:30
OFF
SET
VER
NOTES:
• Test results are automatically stored in the qLabs
memory including all the information of the test (See Section 10 for
reviewing past results).
• The qLabs
®
If the memory is full, the new test result will overwrite the oldest test
result.

9.8 Results and Explanation

• Normal Range:
Results for normal blood were determined by testing 120 subjects
who were not taking anticoagulant medication. The ranges found
were INR: 0.7-1.4.
• Therapeutic Range:
Therapeutic ranges are determined for each patient individually by
their health care professional. While most recommendations are within
an INR range of 2 to 4.5, values outside the indicated range may be
encountered.
• Re-establish Therapeutic Target Range:
There could be a bias from one test system to another. You must re-
establish the INR therapeutic target range at the initial use of qLabs
system. This range may be different from your previous therapeutic
target range.
If the test results need to be reported
instantly, press "
upload the results.
When the "
qLabs
remove the test strip.
MEM
ElectroMeter memory can store up to 200 test results.
" button to print or
" button is pressed, the
ElectroMeter will prompt the user to
®
20
EN
ElectroMeter
®
®