Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Your Two Way Remote Control:
Press the Trunk/Key + Option buttons of your remote simultaneously until 1 beep is
heard to toggle the back lighting control on for 2 seconds or 5 seconds.
Press the Trunk/Key + Option buttons of your remote control simultaneously until 2
beeps are heard to access the features of your remote control.
Clock setting hours will be flashing, use the trunk/key button to increase, and the
option button to decrease. Use the lock button to save and move to the minutes
setting, use the trunk key button to increase and the option button to decrease. Use
the lock button to save and move to the next function.
Alarm Clock, Alarm Clock hours will be flashing, use the trunk/key button to
increase, and the option button to decrease. Use the lock button to save and move
to the Alarm Clock minutes setting, use the trunk key button to increase and the
option button to decrease. Use the lock button to save and move to the Alarm Clock
On/Off Setting use the Trunk/Key to turn on and the Option button to turn off, use
the lock button to save and move to the next function.
Count Down Timer, Count Down Time hours will be flashing, use the trunk/key
button to increase, and the option button to decrease. Use the lock button to save
and move to the Count Down Timer minutes setting, use the trunk key button to
increase and the option button to decrease. Use the lock button to save and move
to the Count Down Timer On/Off Setting use the Trunk/Key to turn on and the
Option button to turn off, use the lock button to save.
Press and Hold Trunk/Key + Option Buttons or allow 5 seconds of inactivity to exit feature setting mode.
Additional Remote Control Settings:
Battery Save Mode: Press Trunk/Key + Option until 3 beep tones are heard = Battery Save Mode. The
unit will remain in the battery save mode, indicated by the battery icon flashing, until any button is pressed.
Button Lock Mode: Press the Trunk/Key + Option Buttons simultaneously until 1 beep tone is heard then
press the Lock button = Button Lock Mode, repeat to unlock the buttons.
Melody, Vibrate, Melody w/Vibrate Selection: Press the Trunk/Key + Option Buttons simultaneously
until 1 beep tone is heard then press the Unlock button = Melody, a second time = Vibrate, a third = Melody
w/Vibrate.
Pre-set 10 Minute Count Down Timer: Press the Trunk/Key + Option Buttons simultaneously until 1
beep tone is heard then press the Trunl/Key Button starts the 10 minute count down timer. Once the timer
expires the unit will beep 10 times.
Turn Off Transmitter's Button Beep Tones: Press the Trunk/Key + Option Buttons simultaneously until
1 beep tone is heard then press the Option button toggles the transmitters button beep tones on and off.
2nd Car Operation: Press the Trunk/Key + Option Buttons simultaneously until 1 beep tone is heard then
press the Lock + Unlock buttons simultaneously this toggles on and off the 2nd car mode. When in the
second car mode, you can program the transmitter to a second vehicle which may have a similar Panther
Alarm system installed allowing full functional control of both vehicles.
ICONS AND SYMBOLS FOUND ON YOUR TWO WAY TRANSMITTER:
Doors are locked Icon.
Doors Unlocked Icon.
Valet Mode.
When Transmitting, any button activated.
Within Range Indicator.
Timed Start Activated.
Someone Paging You From Your Vehicle.
Vibrate or Tone Mode Is On. Toggle either feature on and off by pressing Trunk/Key + Option
until beep is heard, then press the Unlock Button Once.
Vehicle as Been Started By Remote Control.
Vehicle Is Running Under Control of The Remote Start Unit.
Page 10
128-9103
10 of 26
Publicidad
