Operation; On-Screen Display (Osd) - Stryker 0240-031-050 Manual Del Usuario

Operation

Operate the display using the rotary control and the four buttons located on the front panel. A list
of the display controls and their functions is provided below.

On-Screen Display (OSD)

Accessing the On-Screen Display
To use the four front-panel buttons:
PIP: Press to activate Picture Mode (Picture in Picture, Picture by Picture, Picture on Picture)
1.
Bright: Press to activate the Brightness adjustment menu.
2.
Specialty: Press to activate the Specialty adjustment menu.
3.
4. Input: Press to activate the Input selection menu.
Note: Press and hold any of the four front-panel buttons to exit the OSD menu.
Use the Rotary Control to navigate the on-screen menus once they are activated:
Push — Accesses/selects on-screen display menu.
•
Turn Right/Left — With the on-screen display menu activated, turning increases/decreases
•
the value of the selected parameter.
Push and Hold — Exits on-screen display menu.
•
1 2 3 4
EN-15