Franklin Chef FWC35 Manual Del Usuario página 13

All manuals and user guides at all-guides.com
setting, follow the steps in the Operating Your Wine
Cellar section of this manual.)
Check if door has been opened frequently.
LCD displays PROBE ERROR - E
This message is an ALARM MODE indication. The LCD
displays PROBE ERROR on the left and E in the middle
when the thermostatic sensor has malfunctioned. When
this happens, the cellar first stops working for 15 minutes,
then turns ON for 5 minutes and OFF for 15 minutes
automatically and continuously. Contact your authorized
service facility for sensor replacement.
LCD displays LOW TEMP
This message is an ALARM MODE indication. The LCD
displays LOW TEMP
temperature reading in the middle. It indicates that the
actual temperature is much lower than your set
temperature and that the magnet valve may not be
functioning properly and should be replaced. Contact your
authorized service facility immediately.
LCD displays HIGH TEMP
This message is an ALARM MODE indication. The LCD
displays HIGH TEMP
temperature reading in the middle. It indicates that the
actual temperature is much higher than your set
temperature. Possible causes are:
The door might not be fully closed.
The refrigerant may have leaked.
The magnet valve may not be functioning
properly and should be replaced.
If you are certain that the door is not the cause of the
problem, contact
immediately.
on the left and the actual
on the left and the actual
your authorized service
11
facility