Installation; Electrical Connection - Franklin Chef FWC35 Manual Del Usuario

All manuals and user guides at all-guides.com

Installation

Remove the exterior and interior packaging. Use a soft dry
cloth to wipe down the outside of the wine cellar thoroughly.
Use a clean cloth dampened with lukewarm water to wipe
down the inside of the cellar.
The cellar should be located in a well-ventilated area. Avoid
placing it near any source of heat or moisture, or in direct
sunlight. Direct sunlight may affect the finish, and nearby heat
sources will cause higher electrical consumption.
The FWC35 wine cellar is designed to be either built-in or
free-standing. A motorized fan at the bottom of the unit directs
compressor-generated heat away from the compressor and
through the vents at the front of the unit. If the unit is built-in,
allow minimum clearances of ¼ at the sides, ½ at the back
and 1 at the top. Airflow from the vents at the front of the unit
must be unimpeded.
Once the wine cellar is positioned, the adjustable legs should
be turned to level the appliance. This will reduce vibrations.

Electrical Connection

Important! For your personal safety, this appliance must
be properly grounded. In the event of an electrical short
circuit, grounding reduces the risk of shock by providing an
escape wire for the electric current. This appliance is equipped
with a cord having a grounding wire with a grounding plug. The
plug must be inserted into an outlet that is properly grounded
and installed. Consult a qualified electrician if you do not
completely understand these grounding instructions.
DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE
THE THIRD (GROUND) PRONG FROM THE POWER CORD.
Use of an Extension Cord
Avoid the use of an extension cord because of potential safety
hazards under certain conditions.
4