Tabla de contenido
Publicidad
safety precautions and usage statements
Product Ratings:
The lift motors are not designed to operate continuously for more
than [2] minutes in an [18] minute time period or approximately
10% duty cycle. Attempting to circumvent or exceed this rating
will shorten the life expectancy of the product and may void the
warranty.
Weight Limits:
This product is not rated to support weights exceeding 650 lbs/
295 kg. This product is not rated to support weights in excess of
650 lbs/ 295 kg inclusive of the mattress and bedding. The base
will structurally support this weight, provided it is evenly distributed
across the bed base. The adjustable base is not designed to support
or lift this amount in the head or foot sections alone. Exceeding this
weight restriction could damage the bed and/or cause injury and will
void the warranty.
Acoustics:
In normal base operation, the wheels which allow the bed to
maintain its distance from the wall, will make contact with the
steel platform supports of the base creating a contact noise. When
entering, exiting or shifting weight on the base, this contact noise
may be audible as the wheels make contact. This is normal.
SAVE THESE INSTRUCTIONS.
2
All manuals and user guides at all-guides.com
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight
whenever possible. For spot cleaning, wipe area with a light
damp sponge or vacuum with a soft brush attachment to remove
particles. Keep at a minimum of 30cm (12 inches) away from
direct heat sources.
For deeper cleaning, blot liquid spills with a clean dry cloth.
Wipe with a clean cloth dampened with warm water. Do not wet
excessively. A soft bristle brush may be used to remove ingrained
soil. Avoid scratching by gentle brushing. Wipe with a clean cloth
dampened with warm water to remove residues. Dry in shade away
from direct heat.
If persistent marks remain visible after cleaning, seek
professional advice.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
To comply with the FCC RF exposure requirements, no
change to the antenna or the device is permitted. Any
change to the antenna or the device could result in the device
exceeding the RF exposure requirement and void user's right
to operate the device.
Radio Frequency: 2.4 GHz
parts list
Before discarding the packing materials - ensure all the parts are accounted for.
All electronics and components that need to be installed are
located in boxes under the base or attached to the frame.
A)
Wired Remote Control (1)
B)
Mattress Retainer Bar (1)*
C)
Legs (4)
D)
Power Cord (1)
E)
Power Supply (1)
F)
Battery Backup Box
(9 volt batteries not included)
G)
Connecting Strap ‡*
H)
Y-Cord ‡
Misc Parts (not included):
I)
Surge Protector (1)
J)
9 Volt Batteries (2)
*
These items are attached to the base for shipping purposes.
Carefully remove from base and set aside.
‡
Only included in Twin, Twin Long, Queen Split and Cal King
Split bases.
A)
B)*
C)
D)
E)
F)
G)
‡*
H)
‡
3
Publicidad
Tabla de contenido
