BALDR B0340WST2H2R-V8 Manual Del Usuario página 11

2.
The checking order is : Max Record→Min Record→Exit. The
value will display for 3 seconds.
3.
Press and hold the " MEM/▼" button to clear the max and min
record.
4. Normally, the Max and Min record will update every 24 hours at
0:00.
5. If no operation for 3 seconds, it will automatically exit .
TEMPERATURE
1. After power on ,the indoor temperature will display automatically,
it will update reading each 30 seconds and start to receive
outdoor signal which lasts for max 3 minutes.
2.
Indoor temperature display range:-10℃~ 50.0℃(14℉~ 122℉);
for temperature lower than -10℃,the reading will be :"LL.L"; for
temperature higher than +50℃,the reading will be :"HH.H".
3.
Outdoor temperature display range :-40℃~60℃(-40℉~140℉);
for temperature lower than -40℃,the reading will be :"LL.L"; for
temperature higher than +60℃,the reading will be :"HH.H".
4. Arrow indication for temperature changes:
will display when the reading increase by 1℃ within one hour
or compared with last reading.
will display when the reading decrease by 1℃ within one
hour or compared with last reading.
5.
Accuracy: For temperature between 0℃~50℃,the accuracy is
±1 ℃,if out of this range the accuracy will be ±2℃; Temperature
resolution is 0.1 ℃(0.1℉).
6.
Press " RCC/SET " button to select the temperature unit ℃/℉
(Refer to Manual Settings point 12).
HUMIDITY
1. After power on ,the indoor humidity will display automatically, it
will update reading each 30 seconds and start to receive
outdoor signal which lasts for max 3 minutes.
2. Humidity display range: 1%-99%;for humidity lower than 1%,the
reading will be "1%";for humidity higher than 99%,the reading
will be "99%".
11