BALDR B0340WST2H2R-V8 Manual Del Usuario página 9

12. Press " RCC/SET " to select Temperature Unit.Default
setting : ℃.Press the " CH/▲" or " MEM/▼" button to
select ℃/℉.
13. Press " RCC/SET " to confirm and exit.
14. During setting, touch top button to save and exit setting.
15. During setting, if no operation for 20 seconds, it will automatical-
ly save and exit setting.
OUTDOOR TEMPERATURE ALERT
SET OUTDOOR TEMPERATURE ALERT
1. Press and hold "ALERT" button to enter into outdoor tempera-
ture alert value ; the setting data will be flashing in 1Hz.
2.
The setting order is: High temperature alert value→Low tem-
perature alert value→ Exit.
3.
Press " CH/▲" or " MEM/▼" button to adjust data; press and
hold " CH/▲" or " MEM/▼" button will quickly change the data
by 8 steps.
4. If no operation for 20 seconds, it will automatically save and exit
setting.
TURN ON/OFF TEMPERATURE ALERT
1. The temperature alert function will be ON after setting the alert
values.
2. Press "ALERT" button to check the high temperature alert value.
3.
Press " CH/▲" or " MEM/▼" button to turn on/off the high tem-
perature alert function with on/off of the symbol "
4. Press "ALERT" button again to check the low temperature alert
value.
5.
Press " CH/▲" or " MEM/▼" button to turn on/off the low tem-
perature alert function with on/off of the symbol "
6.
Default setting : High temperature alert value 60℃;
Low temperature alert value -40℃.
7. when the outdoor temperature is higher or lower than the upper
and lower temperature alarm setting value,the corresponding
temperature alert symbol "
Bi" sound every 1 minute.
" will keep flashing with "BiBiBi-
/
9
".
".