Care And Cleaning - AVS Ventvisor Deflector Instrucciones De Instalación

Installation Steps
4 piece Set
Scuff rubber trim with Scotch Brite
scuff pad. Clean trim along top of
6
Align vent visor with previously cleaned area and apply
pressure to exposed tape. Remove remaining tape liner.
8

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International,
Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment.
We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of
installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
door with alcohol pad.
Repeat installation procedure for passenger
side rear vent visor.
800-241-7219 • Visit us at lundinternational.com
© 2016 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Remove tape liner from front and rear
flanges. Peel back 2" of tape liner from
7
Apply pressure along length of vent visor to
9
Lund International
logo are trademarks of Lund International, Inc.
TM
Page 3 of 3
each end.
secure.