Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Steps
Peel back 2" (5 cm) of tape liner from each end of the visor.
free end
rear
flange
lower
flange
3
Gently press the exposed areas of tape against the surface and
verify position.
5
Apply pressure along all flanges to ensure proper adhesion
7
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
lateral flange
free end
free end
of tape.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2006 Lund International, Inc. All rights reserved.
, the Auto Ventshade
logo and the AVS
TM
TM
Align the deflector on the door. The lateral flange will attach to the
painted metal surface and the lower flange will attach to the rubber
window channel adjacent to the mirror. Attach the fromt end flange
to the rubber window channel adjacent to the mirror cap.
4
With the visor in its final position, remove the remaining tape liner
6
Repeat Steps 1-7 for opposite side.
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
by pulling on free ends.
Publicidad
