Installation Steps - AVS Ventvisor Deflector Instrucciones De Instalación

Installation Steps

Scuff rubber trim with Scotch Brite scuff
pad. Clean trim/mirror cap with alcohol
rubber window
trim
1
Align driver side vent visor with previously cleaned area
and apply pressure to exposed tape
3
Apply pressure along length of vent visor to
5
NOTE: Actual application may vary slightly from illustrations.
pad.
secure.
Repeat installation procedure for passenger
side front vent visor.
Peel back tape liner 2" on front and rear end
rear end flange
2
Remove remaining tape liner.
4
Page 2 of 3
flanges.
lateral flange
front end flange