Crank Installation - ROTOR 2 IN PUWER Manual De Usuario

1.2. COMPATIBILITY
2INpower cranks use a 30 mm Universal
Bottom Bracket (UBB) system that's
compatible with BB30, PressFit 30, BBright,
BBright Direct fit, BSA, ITA, BB86 and
386 EVO frames.
For more information consult your ROTOR
Authorized Dealer or bike dealer to ensure
correct compatibility of 2INpower with your
frame.
Visit our website: www.rotorbike.com
2. CRANKS INSTALLATION
When installing your ROTOR 2INpower for the first time, complete the following steps:
2.1. Road spacer verification (page 35).
2.2. Uninstall your old cranks (page 36).
2.3. Drive-side crank assembly installation (page 36).
2.4. Left-side crank assembly spacer selection (page 37).
2.5. Left-side crank assembly installation (page 37).
2.6. Fine-tuning adjustment (page 38).
2.7. Uninstalling 2INpower cranks (page 38).
34 Cranks installation
WARNING!
Ensure there is no interference between
the cranks and the frame or any other
component part.
WARNING!
Read and understand this manual carefully
before installing your cranks. Improvements
of product specifications may occur without
any prior notification.