5. FIRST STEPS WITH YOUR ROTOR 2INpower
ROTOR 2INpower becomes active when applying a 2.5 kg force to it. This can be easily
achieved by riding a few meters. After two minutes of inactivity it enters hibernation mode.
To active it again, just apply a 2.5 kg force on the pedals as explained.
Note: 2INpower has an LED that can be observed from the right side of the crankset. The LED
is only visible if the dust cover protecting the charging connector is opened. The LED blinks
while the power meter is active in green, yellow or red light depending on the battery level.
Right after activation and during firmware updates, the LED color turns blue.
LED
First steps with ROTOR 2INpower
43