Kit Assembly; Iso Din Head Unit Provision With Pocket - Metra 99-7350B Instrucciones De Instalación

ISO DIN head unit provision with pocket

1. Clip the Radio trim panel into the
climate control/vent panel (Figure A)
2. Mount the pocket to the radio brackets
with the (4) #8 3/8" Phillips screws
supplied. (Figure B)
3. Slide the head unit into radio brackets
and secure with screws supplied with
the unit. (Figure C)
4. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
Re-connect the negative battery
terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.
(Figure A)
Kit Assembly 99-7350B
4
(Figure B)
(Figure C)