Operation Of Your Blood Pressure Monitor; Inserting The Batteries; Functional Check; Tube Connection - Medline MDS2002 Instrucciones De Uso

4. Operation of your blood pressure monitor

4.1. Inserting the batteries

After you have unpacked your device, insert the
batteries. The battery compartment is located on the
underside of the device (see illustration).
a) Remove cover as illustrated
b) Insert the batteries (4 x size AA 1,5 V), following
the indicated polarity. (+ -)
c) If the battery indicator appears in the display, the
batteries are discharged and the unit will not
function.
d) If batteries are inserted incorrectly, the display
may function eratically or not at all. Check battery po-
larity. (+ -)
Attention!
• After the low battery indicator appears, the device will
not function until the batteries have been replaced.
• Please use "AA" Long-Life or Alkaline 1.5 V Batteries.
Do not use rechargable batteries.
• If the blood pressure monitor is left unused for long
periods, remove the batteries from the device.

Functional check:

Hold on the ON/OFF button down to test all the display
elements. When functioning correctly many icons will ap-
pear.

4.2. Tube connection

• Insert "T-connector" on cuff tubing into cuff connec-
tion opening on the left side of the monitor.
All manuals and user guides at all-guides.com
Low
Battery
Indicator
("T-connector")
6