Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRONIC OVEN CONTROL
3
4
5
6
7
®.°
Et ,,= _
/
1. RECIPE RECALL
TM
2. Slow Cooker
3. Display
4. Add 1 Minute
5, Timer
6, Cooktop Lockout (Cooktop Light)
9
10
11
12
13
14
15
16
7. Oven Light/Oven Lockout
8. Oven Selectors (SERVE WARM)
9. LOGI-CLEAN
TM
10. Temperature Setting
11. Ttmed Cooking
12. C_ck
13. Hour
14. Minu_
15. S_d
16. Stop/Clear
When power is first supplied to the appliance, make sure the
surface burners are in the OFF position. Everything on the display
will light up for 5 seconds. Then the time, "PF" will appear on the
display.
Any other time "PF" appears, a power failure occurred. To
remove "PF" and to reset the clock, press STOP/CANCEL.
When the oven is in use, this display shows time, temperature
and what command pads have been pressed.
When the oven is not in use, the display will show the time of day.
The START pad begins any function, if the START pad is not
touched after touching another pad, "START?" will appear in the
display.
If cooking is interrupted,
touching START will resume the preset
cycle.
The STOP/CLEAR pad clears any incorrect command and
cancels any program during cooking. It will not erase the time
of day.
The oven will also turn off when the door is opened. Close the
door and touch START to resume the cycle.
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
1.
Press CLOCK.
2.
Press the HOUR/MIN "up" or "down" arrow pads until the
correct time of day shows on the display.
Press CLOCK or START.
Tones are audible signals, indicating the following:
One tone
•
Valid pad press
•
Oven is preheating, or has been preheated
•
Function has been entered
Three tones
•
Invalid pad press
Four tones
•
End of cycle
•
Reminder, repeating each minute after the end-of-cycle
tones
Error Tones
Error tones indicate a problem with the electronic oven control.
An error code will appear in the display.
Tone Volume
The volume can be adjusted between high and low.
Publicidad
Tabla de contenido
