Grizzly Tools ERT 3525 Traducción Del Manual De Instrucciones Original página 17

• Keep the equipment well away
from by-standers, children and
pets. Turn off the equipment if
they are in the vicinity.
• The protective devices and
your personal protective equip-
ment will protect yourself and
other people and ensure that
the equipment can be smoothly
operated:
Always wear appropriate work
clothes and personal protective
equipment! Always wear a face
shield or goggles as well as ear
defenders, boots or shoes with
non-slip soles, strong long trou-
sers and work gloves. Never
operate the equipment while
bare footed or wearing sandals.
• Never use the equipment if
it is damaged, incomplete or
has been modified without the
approval of the manufacturer.
Never operate the equipment if
the protective equipment is de-
fective. Before starting up the
equipment always check that
the equipment is in a perfectly
safe condition, especially the
power cable, the switch and the
protective cover.
• Never disconnect or remove
any protective devices!
Use:
• Always maintain a secure foot-
ing while working. Be especially
careful when working on a slop-
ing terrain.
• Do not operate the equipment if
you are tired or lack concentra-
tion and after having drunk alco-
hol or taken medication. Always
take a work break in due time.
• Do not use the equipment while it
is raining, in poor weather condi-
tions and when the surrounding
area is wet. Only work when the
light conditions are good.
• Always keep the cutting line well
away from the body, particularly
the hands and feet, when you
switch on the motor and while
the motor is running.
• Never start the equipment when
it is turned over or not in the cor-
rect working position.
• Switch off the motor and discon-
nect the plug from the mains
socket:
- Whenever you are not using
the equipment
- If the equipment is left unat-
tended
- When the equipment is being
cleaned, maintained or is to
be inspected
- When relocating the equip-
ment
- If the power or extension ca-
ble is damaged
- When you remove or ex-
change the cutting device or
manually adjust the length of
the cutting line
• Check when starting up and
working with the cutting head
that it does not come into con-
tact with stones, rubble, wire or
other foreign bodies.
• Take care not to provoke injuries
on each device used for cutting
the string lengths. After pulling
out a new string, always hold the
machine in its normal working
position before switching it on.
• Always be very careful about
the line cutter as it can cause
very serious cuts
GB
17