Grizzly Tools ERT 3525 Traducción Del Manual De Instrucciones Original página 18

GB
• Never try to stop the cutting
device (cutting line) with your
hands. Always wait until it has
stopped rotating.
• Only use an original cutting line.
The use of a metal wire instead
of the nylon line is impermissible.
• Do not use the equipment to
cut grass that is not growing on
the ground, e.g. grass on walls,
rocks, etc.
• Do not traverse gravel paths
while the equipment is operating.
• Do not operate the equipment in
the vicinity of inflammable liquids
or gases as this could give rise to
the danger of a fire or explosion.
• Store the equipment in a dry
place that is not accessible to
children.
CAUTION! The following
states how damage to the
equipment and possible injury
to people can be avoided:
Taking care of the equipment:
• Ensure that the ventilation open-
ings are not clogged.
• Only use spare parts and acces-
sories that have been supplied
or recommended by the manu-
facturer.
• Never try to repair the equipment
yourself. All work that has not
been listed in these Instructions
must only be carried out by an
authorised servicing agency.
• Treat the equipment with the
greatest care. Always keep the
equipment clean for better and
safer work. Follow the mainte-
nance instructions.
• Never overload the equipment.
Always work within the stated
18
capacity range. Do not use low-
power machines for heavy-duty
work. Do not operate the equip-
ment for purposes for which it is
not intended.
• Always inspect the equipment
before it is to be used. Do not
operate the equipment if safety
devices, parts of the cutting de-
vice or bolts are missing, worn
out or damaged.
Electrical safety:
CAUTION! The following
states how to avoid ac-
cidents and injuries due to
electric shock:
• Before each usage, check the
mains power cable and the ex-
tension cable for damage and
signs of aging. Do not use the
device if the cable is damaged
or worn.
• Always keep the extension cable
well away from the cutting tools.
Should the power cable be-
come damaged during work,
then instantly disconnect
the power cable from the
mains. DO NOT TOUCH THE
POWER CABLE BEFORE IT
HAS BEEN DISCONNECTED
FROM THE MAINS!
• If the power cable for this
equipment is damaged, it must
be replaced by the manufac-
turer, a customer service agent
of the same or a similarly quali-
fied person in order to prevent
hazards.
• Check that the mains voltage
is the same as indicated on the
rating plate.