Guarantee; Repairing Service - Grizzly Tools ERT 3525 Traducción Del Manual De Instrucciones Original

The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. All parts of the oper-
ating cycle have to be considered
while doing so (for example, times
when the power tool is switched off
and times when it is switched on
but running without any load).

Guarantee

• This appliance has a 24-month guaran-
tee. Commercial use will invalidate the
guarantee.
• Damage due to natural wear and tear,
overload or incorrect use is excluded
from the guarantee. Certain com-
ponents are subject to normal wear
and tear and are excluded from the
guarantee. These include in particular:
Line spool, cutting lines and line cutter
provided that the claims are not traced
back on material defects.
• Furthermore, the prerequisite for guar-
antee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused from
material or manufacturing faults, will
be made good free of charge, by re-
placement delivery or repair.
This requires that the appliance is
returned to to the dealer undismantled
and with proof of purchase and guar-
antee.

Repairing Service

• Repairs, which are not covered by
the guarantee, can be carried out for
charge by our service center. Our ser-
vice center will be glad to provide you
with a cost estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
Note: In case of complaint or service,
•
please deliver your device cleaned,
and with an indication of the defect, to
our service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
• Defective units returned to us will be
disposed of for free.
GB
23