Static Alignment - College Park Tribute social mobility Instrucciones Técnicas

All manuals and user guides at all-guides.com
PROTECTIVE COVER ON DOME
Remove the protective cover on dome after alignment is completed and before
patient leaves clinic.
ENDOSKELETAL MOUNTING
Use only high quality proximal endoskeletal components (30 mm).
ASSEMBLY AND DISASSEMBLY
1.
Use the Foot Horn to don and doff the foot shell. Remove the CPI Sock and
replace as needed.
2.
Use a 4 mm hex key to reduce the preload on the bumpers by turning the Stride Control adjuster
counter-clockwise. Record the number of turns for use
in re-assembly.
3.
Use a 6 mm and 4 mm hex keys to remove the axial pin screw.
4.
Attach the pin guide to the axial pin. Push and rotate clockwise.
5.
Unscrew the axial pin from the pin guide and remove it from the ankle bone.
6.
Remove the ankle bone from the foreheel to access the front and rear bumpers
and ankle bushings.
7.
For re-assembly, lubricate the axial pin, inside and outside of the ankle bushings and ankle bushing
pocket, then reverse steps 1-4. Torque axial pin screw to
4 N·m (36 in·lbs).
DO NOT LUBRICATE FRONT AND REAR BUMPERS.

STATIC ALIGNMENT

For optimal function have the patient's weight balanced between the forefoot and heel.
The load line divides the foot at 1/3 heel lever and 2/3 toe lever.
STRIDE CONTROL ADJUSTMENT
The adjustable Stride Control gives you the ability to customize an individual's gait timing, fine-tuning the
foot's response by either turning it clockwise/ counterclockwise. This adjustment affects both plantar and
dorsiflexion resistance without the need to change soft components.
The Tribute ships with a medium Stride Control setting. If new bumpers are fitted, set the preload to
2-turns (medium preload) from the point of initial contact with the ankle bone.
If an additional 1-1/2 turns are required to attain the desired resistance, then a change in bumpers
is recommended.
DYNAMIC ADJUSTMENTS
DESIRED RESULT
Firmer Toe Response
Softer Toe Response
Firmer Heel Response
Softer Heel Response
ALIGNMENT CHANGE
Plantarflex the Tribute or move load
line posterior
Dorsiflex the Tribute or move load
line anterior
Dorsiflex the Tribute or move load
line anterior
Plantarflex the Tribute or move load
line posterior
COMPONENT CHANGE
Increase Stride Control
Front Bumper up one step firmer
Decrease Stride Control
Front Bumper down one step softer
Increase Stride Control
Rear Bumper up one step firmer
Decrease Stride Control
Rear Bumper down one step softer
ENGLISH Tribute | 2