English (Original Instructions) - DeWalt DWE6411 Manual Del Usuario

PALM GRIP SANDER
DWE6411
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
UK & Ireland
Type
Power output
Pad size
Orbits
Orbit
Weight
Noise values and vibration values (triax vector sum) according to EN62841-2-4:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.

WARNING: Always wear hearing protection when
working with the sander.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

WALT one of the

e

DWE6411
V 230
DC
V 230/115
DC
1
W 230

108 x 115
mm

14,000
min
-1
1.6
mm
EC-Declaration of Conformity
kg 1.28
Machinery Directive
dB(A) 82
dB(A) 93
Palm Grip Sander
dB(A) 3
DWE6411
D WALT declares that these products described under
e
m/s 2 <4.0
Technical Data are in compliance with:
m/s <1.5
2
2006/42/EC, EN62841-1:2015, EN62841-2-4:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
20.04.2016
General Power Tool Safety Warnings

SAVE ALL WARNINGS AND INSTRUCTIONS
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: To reduce the risk of injury, read the
instruction manual.
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
FOR FUTURE REFERENCE
EngLIsh
WALT at
e
WALT.
e
15