Intended Use - DeWalt DWE6411 Manual Del Usuario

Additional Specific Safety Rules for Sanders

WARNING: Take special care when sanding some woods
(e.g. beech, oak) and metal which may produce toxic dust.
Wear a dust mask specifically designed for protection
against toxic dust and fumes and ensure that persons
within or entering the work
area are also protected.

WARNING: Use this tool in a well-ventilated area when
sanding ferrous metals. Do not operate the tool near
flammable liquids, gases or dust. Sparks or hot particles
from sanding or arcing motor brushes may ignite
combustible materials.

WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
Sanding Paint

WARNING: Observe the applicable regulations for
sanding paint. Pay special attention to the following:
• Whenever possible, use a vacuum extractor for dust collection.
• Take special care when sanding paint which is possibly lead
based:
ʵ Do not let children or pregnant women enter the work
area.
ʵ All persons entering the work area should weara mask
specially designed for protection against lead paint dust
and fumes.
ʵ Do not eat, drink or smoke in the work area.
• Dispose of dust particles and any other removal debris safely.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment of hearing.
• Risk of personal injury due to flying particles.
• Risk of burns due to accessories becoming hot
during operation.
• Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Date Code Position
The date code, which also includes the year of manufacture, is
printed into the housing.
Example:
2016 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Palm grip sander
1 Dustbag
1 Sheet of sanding paper
1 Paper punch
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/Off switch
1
Front paper clamp
2
Front clamp button
3
Base plate/pad
4
Paper-limiting ribs
5
Rear paper clamp
6
Side clamps
7
Holding tabs
8
Vac-adapter
9
Dust bag
10
Dust bag collar
11

Intended Use

Your palm grip sander DWE6411 has been designed for sanding
of wood, metal and plastics in a professional environment.
DO nOt use under wet conditions or in the presence of
flammable liquids or gases.
This sander is a professional power tool.
DO nOt let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
Your D WALT tool is double insulated in accordance
e
with EN62841; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the D
service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
EngLIsh
WALT
e
17