Assembly Instructions; Installation Of Engine Bg39 - Dynapac BG39 Power Float Manual De Instrucciones

INSTRUCTION MANUAL – BVG39
BG39CC HONDA
(in) 70.9 x 36.6 x39.8
IMPORTANT
The above information is a general description only, is not guaranteed and contains no warranties of
any kind

ASSEMBLY INSTRUCTIONS

INSTALLATION OF ENGINE BG39

Available for BG39CC Kit (without engine) P/N 369015 or for engine replacement .
- Put in place the engine on the plate (3) and secure it with washers (1) and screw (2) (17mm flat spanner) .
- The clutch (4) and the key (5) (delivered with the HONDA engine) on the engine shaft .
Then screw in place the cover holder (6) on the engine flange with screws (7) and washers (8) (13mm flat
spanner ) .
- Secure the clutch with spacer (9) and screw (10) (17mm flat spanner .
- Put in place the V-belt (11) and tighten it with the pulley (12) (8mm hexagonal spanner and 17mm flat
spanner) .
- Put in place the V-belt cover with washers (15) and screws (16) (13mm flat spanner) .
- Connect the cable 17 to the stop engine cable .
File: 4700369016_ENG_NO.doc Page 7 / 24