Variations For Appliances Fitted With Vapour Condenser - Adler AC2-ELECTRONIC Manual De Instrucciones

GB
B
C
D
E
2.6 VARIATIONS FOR APPLIANCES FITTED WITH
VAPOUR CONDENSER
Before positioning the appliance, it is necessary to attach the battery
breather.
- Tighten the outlet fitting "A" to the appliance outlet stack (fitting
supplied).
- Attach the black tube "B", reachable from the back panel, to the rubber
door "C"
- Carefully tighten the supplied tie strip.
- Attach the outlet tube and carefully tighten the tie strip supplied.
A
- Finally for the "water inlet" connection, it is necessary to remove the
front panel:
Connect the cold water inlet to the electric fan "D"
Connect the hot water inlet to the electric fan "E"
Refit the front panel and test the appliance as directed in Chapter 2.8
"Commissioning (filling the boiler)".
Page. 9