Detergent Quantity Adjustment - Adler AC2-ELECTRONIC Manual De Instrucciones

GB
Page. 14
Set washing tank temperature:
Press A push-button several times until wording " t " "55" is displayed; then adjust it by means of G
and L push-buttons.
Once the temperatures have been set, just hold push-button A pressed to return to the previous
condition
2.12

DETERGENT QUANTITY ADJUSTMENT

It is possible to set the detergent quantity by changing the detergents dispensers enabling time.
Detergent
Enter the programming menu as follows: open the door, keep contemporarily G and L push-buttons
pressed for a few seconds until wording "PH" is displayed. Then press push-button A a few times
until "dL" appears in the first dial.
In the second dial the display shows the set value in seconds; it is possible to increase or decrease
the switching time through L and G push-buttons.
Note: The point indicates ½ second.
Rinse aid
Once the detergent has been adjusted press push-button "A" once again to pass to the following
item and to display "bL" rinse aid. Press push-buttons "L" and "G" to increase or decrease the
switching time.