ECOVACS DEEBOT OZMO 950 Manual De Instrucciones página 25

No. Malfunction
DEEBOT does not clean
5 automatically at the scheduled
time.
DEEBOT does not clean the
6
whole area.
The water is not coming out of
7 the Reservoir when DEEBOT is
mopping.
Possible Causes
Time Scheduling function is cancelled.
The Continued Cleaning function is turned
ON and DEEBOT has just finished cleaning
the scheduled cleaning area.
DEEBOT is switched OFF.
The robot's battery is low.
The robot's Suction Intake is blocked and/or
there is debris stuck in its components.
The cleaning area is not tidy.
The water inlet filter on the bottom of
Reservoir is clogged.
The Reservoir runs out of water.
The water outlets on the bottom of DEEBOT
are clogged.
6. Troubleshooting
Solutions
Program DEEBOT to clean at specific times using the
ECOVACS App.
This is normal. No solution necessary.
Switch ON DEEBOT.
Keep DEEBOT switched ON and connected to the
Docking Station to make sure it has a full battery to work
at any time.
Power OFF DEEBOT, clean the Dust Bin and invert the
robot. Clean the robot's Suction Intake, Side Brushes and
the Main Brush as described in section 4.
Remove small objects from the floor and tidy up the
cleaning area before DEEBOT starts cleaning.
Unscrew the water inlet on the bottom of Reservoir and
clean the filter.
Add water into the Reservoir.
Check the water outlets on the bottom and clean.
25
EN