Etac molift Raiser Pro HeelStrap Instrucciones De Ensamblaje página 5

Mounting the Raiser Pro Heelstrap
Make sure the user is sitting down and that the wheels on the Molift
Raiser Pro is locked before mounting the HeelStrap. Make sure the
HeelStrap is correctly fastened before transferring the user.
The user is sitting down, the feet are placed on the footplate and the
1
height of the leg support is adjusted to the desired height as described in
the Molift Raiser Pro user manual. Make sure the wheels are locked.
Fasten the HeelStrap by attaching one side to the turning knob. Make sure
2
it is securly fastened before attaching on the other side.
Place the HeelStrap around the users heels and fasten the HeelStrap on
3
the turning knob on the other side of the Molift Raiser Pro. The HeelStrap
has two holes on each side and can be adjusted into 3 different length
depending on the size and stance of the user's feet.
Make sure the HeelStrap is fitted firmly around the user's heels and as
4
low as possible, preferably in contact with the Raiser Pro base plate. The
HeelStrap shall provide support against the user´s heels.
5
Molift Raiser Pro / www.etac.com
1
3
2
4