System Set-Up Menu - Strong SRT 5150 Manual Del Usuario

5150 UM-B5 12/22/04
PART 1 • English

5.1.4.1 System Set-up Menu

To install your receiver to your personal preferences, go to "System Set-up" menu. Then please apply the
following steps:
1. Press the Menu button.
2. Using UP/DOWN keys, select "Installation" and press OK.
3. Using UP/DOWN keys, select "System Set-up" and press OK.
Language Settings: You can change the language of the menu, audio and subtitles by applying
the following steps <Please see inside cover Screen 12>:
1. Select "Language Settings" and Press OK or the Right button.
2. Select "Menu Language" and Press OK or the Right button.
3. Using UP/DOWN keys, select the language in which you want your menu to be displayed
4. You can also choose your preferred first audio language, second audio language and the
5. Press BACK until you return to the main menu.
TV/VCR Settings <Please see inside cover Screen13>: You can set the TV/VCR settings to your
personal preferences. Check your TV and VCR user manuals for the correct settings. You can change
your TV/VCR settings by applying the following steps:
1. Select "TV/VCR Settings" and press OK or the Right button.
2. Press BACK until you go back to main menu.
All manuals and user guides at all-guides.com
5:27 PM Page 13
(Please see inside cover Screen 11)
and press OK. The screen of the menu will change to the language of your choice.
subtitle language by applying the same steps.
TV Mode: Press OK or the Right button and set your TV mode to "Multi", "PAL" or "NTSC".
Video Mode: Press OK or the Right button and set your VCR mode to "CVBS"
(Composite video) or "RGB" (preferred option if your TV set is compatible with it).
Screen Mode: Press OK or the Right button and set your screen mode to "4:3 Full
Screen", "4:3 Letter" or "16:9".
Audio Output: Press OK or the Right button and set your audio output to
"Stereo", "Left only" or "Right only" (left or Right is for mono TV sets)
S/PDIF Output: Press OK or the Right button and activate your S/PDIF output on
the back of your receiver, so you can connect it to a digital Audio amplifier using
a coaxial cable.
VCR Scart: Press OK or the Right button and set the scart output to "Auto" or "STB"
(Set Top Box). If set to "STB", the VCR scart signal is not automatically looped through.
Antenna power (ON/ OFF). Antenna Power is preset in OFF Mode. Only when
using an active antenna this function must be switched "ON". Press OK or the
Right button to select "ON".
UHF Mode: Press OK or the Right button and set the UHF mode to "PAL B/G",
"PAL I" or "PAL D/K". If the TV set is connected using a coaxial (RF) cable, you
must select RF modulator type here. The RF modulator type affects the channel
audio. (Select PAL I for UK , NI or ROI use.)
UHF Channel: Press OK or the Right button and set the UHF channel number to
the same UHF channel number of your TV set. This only has to be done if your TV
set is connected with a coaxial (RF) Cable. If the UHF Channel numbers of the
receiver and the TV set are not set the same, no picture will be displayed. Select a
channel between 21 and 69 and press OK to confirm.
13