CLOSEMOUNT-STYLE FAN MOUNTNG
1.
Remove canopy cover from bottom of canopy (B).
[NOTE: It may be necessary to use the handle
end of a screwdriver (not included) to remove the
canopy cover by tapping on the canopy cover
from the inside of the canopy (B).]
*Helpful Hint: Closemount-style mounting is
more suitable for ceilings lower than 8 ft. high.
The downrod (A) and canopy cover are not used
in this type of installation.
Remove every other screw and lock washer from
2.
top of motor housing (D).
Pull wires up through hole in the middle of the
3.
canopy (B) and attach canopy (B) to motor
housing (D) using the three screws and three lock
washers previously removed.
All manuals and user guides at all-guides.com
10
1
2
B
D
D
3
B
D
Lowes.com/harborbreeze
B
Canopy
Cover