Stel TIG μP 253H AC/DC Manual De Instrucciones página 54

TIG µP 253H AC/DC
TECHNICAL DESCRIPTION
ters PrG will blink on the left-hand display (ref.21 page 9) .
2) With the encoder A (ref.5 page 9) select the number of the programme in which
you want to save the welding parameters .
3) Hold down the HF ON button (ref.7 page 9) for more than 2 seconds; you will
hear 4 sounds of the buzzer and the letters Sto will blink on the left-hand display
(ref.21 page 9). At this point the programme has been saved and you can continue
using the machine.
LOADING STORED WELDING PROGRAMMES
1) Hold down simultaneously for 1 second the buttons PG (ref.15 page 9) and F
(ref.17 page 9); you will hear a double sound of the buzzer and the letters PrG will
blink on the left-hand display (ref.21 page 9).
2) With the encoder A (ref.5 page 9) select the number of the programme that you
want to load .
3) Hold down the SL button (SET) (ref.8 page 9) for more than 2 seconds; you will
hear 4 sounds of the buzzer and the letters ReC will blink on the left-hand display
(ref.21 page 9).
At this point the programme has been loaded and you can continue using the ma-
chine.
ATTENTION : a welding programme can be stored on a programme number alrea-
dy stored. The data of the deleted programme will be irretrievably lost.
54
ENGLISH
COD. 6910000030
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TIG µP 253H AC/DC
TECHNICAL DESCRIPTION
ters PrG will blink on the left-hand display (ref.21 page 9) .
2) With the encoder A (ref.5 page 9) select the number of the programme in which
you want to save the welding parameters .
3) Hold down the HF ON button (ref.7 page 9) for more than 2 seconds; you will
hear 4 sounds of the buzzer and the letters Sto will blink on the left-hand display
(ref.21 page 9). At this point the programme has been saved and you can continue
using the machine.
LOADING STORED WELDING PROGRAMMES
1) Hold down simultaneously for 1 second the buttons PG (ref.15 page 9) and F
(ref.17 page 9); you will hear a double sound of the buzzer and the letters PrG will
blink on the left-hand display (ref.21 page 9).
2) With the encoder A (ref.5 page 9) select the number of the programme that you
want to load .
3) Hold down the SL button (SET) (ref.8 page 9) for more than 2 seconds; you will
hear 4 sounds of the buzzer and the letters ReC will blink on the left-hand display
(ref.21 page 9).
At this point the programme has been loaded and you can continue using the ma-
chine.
ATTENTION : a welding programme can be stored on a programme number alrea-
dy stored. The data of the deleted programme will be irretrievably lost.
54
ENGLISH
COD. 6910000030
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it