Tig Welding; Tig Welding Procedures - Stel TIG μP 253H AC/DC Manual De Instrucciones

ENGLISH
TIG µP 253H AC/DC
COD. 6910000030
2) T joint
The angle of inclination
electrode varies
to the passes made: the
of the electrode is performed by swinging it and stopping at the sides of the seam
so as to avoid the accumulation of weld material in the centre of the weld.
- Removing slag:
For coated electrodes, it is necessary to remove the slag after each pass. The slag
is removed with a small hammer or, in the case of brittle slag, with a wire brush.
To make the different types of joint correctly in the various positions, it is
necessary to practice under the guidance of an expert.
7.0– TIG WELDING
7.1- PROCEDURES AND TECHNICAL DATA FOR TIG WELDING
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL DESCRIPTION
of the
according
movement
63
ENGLISH
TIG µP 253H AC/DC
COD. 6910000030
2) T joint
The angle of inclination
electrode varies
to the passes made: the
of the electrode is performed by swinging it and stopping at the sides of the seam
so as to avoid the accumulation of weld material in the centre of the weld.
- Removing slag:
For coated electrodes, it is necessary to remove the slag after each pass. The slag
is removed with a small hammer or, in the case of brittle slag, with a wire brush.
To make the different types of joint correctly in the various positions, it is
necessary to practice under the guidance of an expert.
7.0– TIG WELDING
7.1- PROCEDURES AND TECHNICAL DATA FOR TIG WELDING
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL DESCRIPTION
of the
according
movement
63