Using A Bluetooth Microphone; Maintenance; Inspection Equipment - RIDGID micro CA-330 Manual De Operación

Using a Bluetooth
The first time you connect a Bluetooth compat-
ible microphone you will need to "pair" it to
the CA-330. Turn on your microphone and ini-
tiate its "pairing" mode. Please consult your mi-
crophone's documentation for specific instruc-
tions.
In the CA-330 Bluetooth settings menu, select
SEARCH. Your Bluetooth microphone should
then appear on the screen. Select your micro-
phone and press SELECT
Once successfully connected, you will see
the symbol next to your device change from
to . Now audio from your Bluetooth mi-
crophone will be used when recording video on
the CA-330.
Use with SeeSnake

Inspection Equipment

The micro CA-330 Inspection Camera can
also be used with various SeeSnake Inspec -
tion Equipment and is specifically designed
to be used with the microReel, microDrain™
and the nanoReel Inspection Systems. When
used with these types of equipment, it retains
all of the functionality described in this manual.
The micro CA-330 Inspection Camera can
also be used with other SeeSnake Inspection
Equipment for viewing and recording only.
For use with SeeSnake Inspection Equip -
ment, the imager head and any cable exten-
sions must be removed. For the microReel,
microDrain™, nanoReel and similar equip-
ment, see the operator's manual for informa-
tion on proper connection and use. For other
SeeSnake Inspection Equipment (typically a
reel and monitor), an adapter must be used to
connect the micro CA-330 Inspection Camer -
a to a Video-Out port on the SeeSnake Inspec -
tion Equipment. When connected in this man-
ner, the micro CA-330 Inspection Camera will
display the camera view and can be used for
recording.
When connecting to SeeSnake Inspection
Equipment (microReel, microDrain™, or nano -
Reel), align the interconnect module con-
nected to your reel with the cable connector on
the micro CA-330 Inspection Camera, and
slide it straight in, seating it squarely. (See
Figure 18.)
® Microphone
on the CA-330.
®
micro CA-330 Inspection Camera
Figure 18 – Camera Connector Plug Installed
Do not twist the connector plug to
NOTICE
prevent damage.
Locating the Sonde
If used with a sonde (In-Line Transmitter), the
sonde can be controlled two ways. If the reel is
equipped with a sonde key, that can be used to
turn the sonde ON and OFF. Otherwise, the
sonde is turned ON by decreasing LED bright-
ness to zero. Once the Sonde has been lo-
cated, the LEDs can be returned to their nor-
mal brightness level to continue the inspection.
A RIDGID locator such as the SR-20, SR-60,
Scout ® , or NaviTrack
used to locate features in the drain being in-
spected.
Figure 19 – Locating the Reel Sonde
To locate the Sonde, turn the locator ON and
set it to Sonde mode. Scan in the direction of
the Sonde's probable location until the locator
detects the Sonde. Once you have detected
the Sonde, use the locator indications to zero
in on its location precisely. For detailed in-
structions on Sonde locating, consult the Oper -
ator's Manual for the locator model you are
using.

Maintenance

WARNING
Remove battery before cleaning.
® II set to 512 Hz can be
13