Shooting Mode - Zeiss DTI 3/25 Instrucciones De Uso

Shooting mode

You have the possibility to take photos and videos. Press and hold the Shutter
button (6) to switch between the two shooting modes. The symbol at the top left of
the display changes to indicate the selected mode.
Briefly press the Shutter button (6) once to capture a photo or record a video.
Briefly press the Shutter button (6) again to stop a video recording in progress.
Note: Longer video recordings are automatically split into several smaller files of
10 minutes each when saved.
Photo mode
Menu
Press and hold the menu button (8) to show the main menu on the display. Look
through the viewfinder (10). The main menu offers the following options:
• Brightness: Set the brightness of the display here. There are four brightness
levels to choose from. The brightness is lowest at level 1. The brightness is
highest at level 4.
• Contrast: Adjust the contrast of the scene here. There are four contrast levels to
choose from. The contrast is lowest at level 1. The contrast is highest at level 4.
• Contrast Boost: Activate this mode for better visibility in high humidity or fog.
• Hot Tracking: In observation mode, select "Hot Tracking" to highlight the
warmest point in the scene with a small red square.
• Auto Calibration: Set manual (Auto Calibration = Off) or automatic calibration
(Auto Calibration = On) here.
• P.I.P. (Picture in Picture): a central section of the image is enlarged by a factor
of 2 and shown in a small magnification window on the display.
• WLAN: Switch WLAN on/off. When WLAN is switched on, the device creates
a hotspot that allows another device (e.g. smartphone) to make a connection.
• System: Make all system-relevant settings here, including language, time and
factory settings.
The arrow buttons (7) and the menu button (8) are used to navigate in the main menu.
Press the right arrow button (7) to scroll down. Press the left arrow button (7)
to scroll up.
Briefly press the menu button (8) to select a menu item. This opens the submenu.
Make your settings using the arrow buttons (7).
Briefly press the menu button (8) to confirm your selection and return to the main menu.
Press the menu button (8) for a longer time to exit the main menu and return to
observation mode.
Video mode
2
X
Contrast Boost
The contrast boost makes it possible for you to display the image in an improved way in
high humidity or fog. This highlights edges so that structures can be recognized better.
To activate the contrast boost on your device, select "Contrast Boost" in the main
menu. Then select "On" or "Off". Briefly press the menu button (8) to confirm the
selection.
Note: It is recommended to use this mode only in the above-mentioned conditions
and to disable this mode in normal conditions.
2
X
13 | 200 EN